How to Load Token on Prepaid Meter in Nigeria

Are you looking for how to load token on prepaid meter in Nigeria…even without light? Prepaid meters are digital electricity meters that allow customers to pay for electricity before consumption. These meters operate using tokens, which are 20-digit codes purchased from electricity distribution companies or vendors. Loading the token correctly ensures that your electricity supply remains uninterrupted.

How to Load Token on Prepaid Meter

This guide will walk you through the step-by-step process of loading a token on your prepaid meter in Nigeria.

Types of Prepaid Meters in Nigeria

Before proceeding, it’s important to identify the type of prepaid meter you have. The common prepaid meters used in Nigeria include:

Mojec Prepaid Meter
Conlog Prepaid Meter
Hexing Prepaid Meter
Energizer Prepaid Meter
Schneider Prepaid Meter

Each meter brand may have slightly different procedures, but the general process remains the same.

Step-by-Step Guide on How to Load Token on Prepaid Meter

Step 1: Purchase an Electricity Token

Before you can load a token, you need to purchase one from your electricity distribution company (DisCo) or authorized vendors. You can buy a token through:

Electricity Distribution Company Offices
Online Platforms (e.g., BuyPower, iRecharge, JumiaPay, Quickteller, VTU vendors, etc.)
Bank Mobile Apps and USSD codes
POS Agents and Local Vendors

After purchasing, you will receive a 20-digit token via SMS or email.

Step 2: Locate Your Prepaid Meter

Your prepaid meter is usually installed inside or outside your home. Ensure that it is switched on and operational before proceeding to load the token.

Step 3: Enter the 20-Digit Token

Press the buttons on your prepaid meter keypad to enter the 20-digit token carefully.
Ensure you enter the correct digits to avoid an error message.

Step 4: Press the “Enter” or “OK” Button

After entering the token:

For most meters, press the “Enter” or “OK” button to confirm.
If the token is valid, your meter will display a success message, and the purchased energy will be credited.
If the token is incorrect, you will receive an “Invalid Token” message. In such a case, double-check the token and re-enter it correctly.

Step 5: Confirm the Meter Balance

You can check your prepaid meter balance by using the following command:

For Mojec Meters: Dial 07 and press “Enter”.
For Hexing Meters: Dial 009 and press “Enter”.
For Conlog Meters: Dial #009#.
For Schneider Meters: Dial #040#.

This will display the remaining electricity units on the meter.

How to Load Prepaid Meter Token Without Light

A prepaid electricity meter allows users to buy electricity credits in advance and load them using a unique token. However, a common challenge many people face is loading the token when there is no power supply. Fortunately, there are solutions to this problem.

In this article, we’ll walk you through the different ways to load your prepaid meter token without light.

Methods to Load Prepaid Meter Token Without Electricity

1. Use a Generator or Inverter

If you have a generator or an inverter, turn it on to temporarily power a few electrical appliances. Plug in your prepaid meter and load the token as usual. Once the token is accepted, power can be restored when the main supply is available.

2. Use Battery Power on Some Prepaid Meters

Some prepaid meters come with an inbuilt battery that keeps them operational for some time after power is lost. If your meter has this feature, you can load your token before the battery runs out. Check by pressing any button to see if the screen lights up.

3. Wait for Power Restoration and Load Immediately

If none of the above methods work, the best option is to wait until the electricity distribution company restores power. Once power is back, quickly load your token to prevent being disconnected again.

What to Do If Your Meter Does Not Accept the Token

If, after restoring power, your meter refuses to accept the token, try the following:

Check the Token Code: Ensure you are entering the correct 20-digit token.
Reset the Meter: Some meters require a reset after running out of power completely. Follow the reset procedure for your meter model.
Contact Your Distribution Company (DisCo): If the problem persists, reach out to your electricity provider for assistance.

Conclusion on How to Load Token on Prepaid Meter in Nigeria

Loading a token on a prepaid meter in Nigeria is a simple and straightforward process. By purchasing a valid token and entering the 20-digit code correctly, you can enjoy uninterrupted electricity supply. In case of any issues, always reach out to your electricity distribution company for assistance.

HOT Stories